Motion Boom Plus | Enceinte portable extérieure
169,99€
Color
Black
Platinum Gray
Camo
Motion Boom Plus | Enceinte portable extérieure
poster
Forte. Puissante. Immersive.
Forte. Puissante. Immersive.
Forte. Puissante. Immersive.

Deux woofers de 30 W et des radiateurs passifs offrent un son puissant et immersif, tandis que deux tweeters de 10 W vous permettent d’entendre chaque détail de votre chanson avec une clarté cristalline.

FAQ

  • How do I turn off Motion Boom Plus’s voice prompts?
    1. Connect your device to Motion Boom Plus.
    2. Open the soundcore app.
    3. Press "..." in the top right corner to access more options.
    4. Turn off voice prompts.
  • How do I upgrade Motion Boom Plus’s firmware via the soundcore app?
    1. Open the soundcore app and press 'Update Firmware'.
    2. Do not use your phone while the firmware is updating, except if you’ve set the soundcore app to run in the background.
    3. Motion Boom Plus will restart automatically after upgrading.
  • How do I reset Motion Boom Plus?
    Turn on the speaker, then hold the Bluetooth and Volume + buttons for 5-8s.
  • I haven't used Motion Boom Plus for a while, why won't it turn on?
    If you haven't charged or used Motion Boom Plus in a long time, the battery may be over-discharged. Charge for at least one hour before turning it on.
  • Will Motion Boom Plus sink if it is dropped in water?
    No, Motion Boom Plus can float on the surface of the water.
  • How do I pair 2 Motion Boom Plus speakers together wirelessly via TWS?
    1. Turn on 2 Motion Boom Plus speakers and connect either one to your device via Bluetooth.
    2. Hold the Bluetooth button for 2-3s on both speakers until they flash white.
    3. Wait for 3-5s until you hear 'ding' sound. This means they are successfully paired.
    4. Once paired, the primary speaker will show a solid blue light, while the secondary speaker will show white light.
  • Does Motion Boom Plus have a built-in microphone?
    Yes.
  • How do I pair 2 Motion Boom Plus speakers together wirelessly via PartyCast?
    1. Turn on 2 Motion Boom Plus speakers and connect one to your device via Bluetooth.
    2. Press the PartyCast button on both speakers and you will see a solid white light.
    3. Wait for 3-5s until you hear a 'ding' sound. This means they are successfully paired.
    4. Once paired, the primary speaker will show solid white light, while the secondary speaker will show white light.
  • What do the indicator lights mean during charging?
    - Solid red light while charging.
    - Solid white light when fully charged.
  • Can I use Motion Boom Plus as a battery to charge other devices?
    Yes. There is a USB-A port for charging other devices.
  • How to recharge the speaker?
    You can use a USB-C wall charger with 5V/3A output to recharge.
  • How long does it take to fully recharge Motion Boom Plus?
    By using a 5V/3A USB-C wall charger, you can recharge to 100% in 5.5 hours.
  • What should I do if the speaker is not charging?
    To fix the charging issue, you can try the following steps:
    1. Wipe clean the tip of the charging cable.
    2. Try using a different cable or wall charger (5V/3A output) to recharge the speaker.
    3. Reset the speaker.
    4. Recharge for at least half an hour to prevent over-discharge.
  • What does it mean when the light flashes red?
    It means the battery is low.
  • What should I do if I fail to pair the speaker with my phone?
    1. Confirm that the speaker is fully charged and not paired with other devices.
    2. Forget all Bluetooth pairing records on your device.
    3. Reboot your speaker and your device.
    4. Disable and enable Bluetooth on your device.
    5. Reset the speaker.
    6. Try to connect the speaker to another device.
  • Is a PIN or Password needed when pairing soundcore Motion Boom Plus with a device?
    A PIN or password is not needed when pairing a soundcore speaker with a device. Hence, if you encounter an issue during the pairing process, please try these steps:
    1. Confirm that soundcore Motion Boom Plus is fully charged and not connected to other devices.
    2. Forget all Bluetooth pairing records on your device.
    3. Reboot your soundcore Motion Boom Plus and your device.
    4. Disable and then enable Bluetooth on your device.
    5. Reset soundcore Motion Boom Plus by holding the Bluetooth and Volume+ buttons at the same time for 5-10s until Motion Boom Plus restarts.
    6. Connect soundcore Motion Boom Plus to a different device.
  • How do I fix soundcore Motion Boom Plus's noise issues?
    1. Confirm that the speaker is fully charged.
    2. Reset the speaker.
    3. Reboot your speaker and your device.
    4. Try connecting the speaker to another device. If possible, try using another app or audio source.
    5. Ensure there are no physical objects interfering with the Bluetooth connection from the speaker to the device, such as a doorway or wall.
  • What should I do if soundcore Motion Boom Plus doesn't make any sound?
    1. Confirm that the speaker is fully charged.
    2. Reset the speaker.
    3. Restart your speaker and the device it is paired with to test again.
    4. Try connecting the speaker to a different device. If possible, try another app or audio source.
    5. Make sure the volume on both the speaker and the paired device are turned up.
  • How do I fix the no sound issue when soundcore Motion Boom Plus is paired with other PartyCast1.0 speakers?
    Double press the PartyCast button on soundcore Motion Boom Plus.
  • Declaration of Conformity

    A3129-EU DOC

    2024-02-28T10:02:25Z

    • How do I turn off Motion Boom Plus’s voice prompts?
      1. Connect your device to Motion Boom Plus.

      2. Open the soundcore app.

      3. Press "..." in the top right corner to access more options.

      4. Turn off voice prompts.
    • How do I upgrade Motion Boom Plus’s firmware via the soundcore app?
      1. Open the soundcore app and press 'Update Firmware'.

      2. Do not use your phone while the firmware is updating, except if you’ve set the soundcore app to run in the background.

      3. Motion Boom Plus will restart automatically after upgrading.
    • How do I reset Motion Boom Plus?
      Turn on the speaker, then hold the Bluetooth and Volume + buttons for 5-8s.
    • I haven't used Motion Boom Plus for a while, why won't it turn on?
      If you haven't charged or used Motion Boom Plus in a long time, the battery may be over-discharged. Charge for at least one hour before turning it on.
    • Will Motion Boom Plus sink if it is dropped in water?
      No, Motion Boom Plus can float on the surface of the water.
    • How do I pair 2 Motion Boom Plus speakers together wirelessly via TWS?
      1. Turn on 2 Motion Boom Plus speakers and connect either one to your device via Bluetooth.

      2. Hold the Bluetooth button for 2-3s on both speakers until they flash white.

      3. Wait for 3-5s until you hear 'ding' sound. This means they are successfully paired.

      4. Once paired, the primary speaker will show a solid blue light, while the secondary speaker will show white light.
    • Does Motion Boom Plus have a built-in microphone?
      Yes.
    • How do I pair 2 Motion Boom Plus speakers together wirelessly via PartyCast?
      1. Turn on 2 Motion Boom Plus speakers and connect one to your device via Bluetooth.

      2. Press the PartyCast button on both speakers and you will see a solid white light.

      3. Wait for 3-5s until you hear a 'ding' sound. This means they are successfully paired.

      4. Once paired, the primary speaker will show solid white light, while the secondary speaker will show white light.
    • What do the indicator lights mean during charging?
      - Solid red light while charging.

      - Solid white light when fully charged.
    • Can I use Motion Boom Plus as a battery to charge other devices?
      Yes. There is a USB-A port for charging other devices.
    • How to recharge the speaker?
      You can use a USB-C wall charger with 5V/3A output to recharge.
    • How long does it take to fully recharge Motion Boom Plus?
      By using a 5V/3A USB-C wall charger, you can recharge to 100% in 5.5 hours.
    • What should I do if the speaker is not charging?
      To fix the charging issue, you can try the following steps:

      1. Wipe clean the tip of the charging cable.

      2. Try using a different cable or wall charger (5V/3A output) to recharge the speaker.

      3. Reset the speaker.

      4. Recharge for at least half an hour to prevent over-discharge.
    • What does it mean when the light flashes red?
      It means the battery is low.
    • What should I do if I fail to pair the speaker with my phone?
      1. Confirm that the speaker is fully charged and not paired with other devices.

      2. Forget all Bluetooth pairing records on your device.

      3. Reboot your speaker and your device.

      4. Disable and enable Bluetooth on your device.

      5. Reset the speaker.

      6. Try to connect the speaker to another device.
    • Is a PIN or Password needed when pairing soundcore Motion Boom Plus with a device?
      A PIN or password is not needed when pairing a soundcore speaker with a device. Hence, if you encounter an issue during the pairing process, please try these steps:

      1. Confirm that soundcore Motion Boom Plus is fully charged and not connected to other devices.

      2. Forget all Bluetooth pairing records on your device.

      3. Reboot your soundcore Motion Boom Plus and your device.

      4. Disable and then enable Bluetooth on your device.

      5. Reset soundcore Motion Boom Plus by holding the Bluetooth and Volume+ buttons at the same time for 5-10s until Motion Boom Plus restarts.

      6. Connect soundcore Motion Boom Plus to a different device.
    • How do I fix soundcore Motion Boom Plus's noise issues?
      1. Confirm that the speaker is fully charged. 2. Reset the speaker. 3. Reboot your speaker and your device. 4. Try connecting the speaker to another device. If possible, try using another app or audio source. 5. Ensure there are no physical objects interfering with the Bluetooth connection from the speaker to the device, such as a doorway or wall.
    • What should I do if soundcore Motion Boom Plus doesn't make any sound?
      1. Confirm that the speaker is fully charged.

      2. Reset the speaker.

      3. Restart your speaker and the device it is paired with to test again.

      4. Try connecting the speaker to a different device. If possible, try another app or audio source.

      5. Make sure the volume on both the speaker and the paired device are turned up.
    • How do I fix the no sound issue when soundcore Motion Boom Plus is paired with other PartyCast1.0 speakers?
      Double press the PartyCast button on soundcore Motion Boom Plus.
    • Declaration of Conformity

      A3129-EU DOC

      2024-02-28T10:02:25Z

  • How do I turn off Motion Boom Plus’s voice prompts?
    1. Connect your device to Motion Boom Plus.
    2. Open the soundcore app.
    3. Press "..." in the top right corner to access more options.
    4. Turn off voice prompts.
  • How do I upgrade Motion Boom Plus’s firmware via the soundcore app?
    1. Open the soundcore app and press 'Update Firmware'.
    2. Do not use your phone while the firmware is updating, except if you’ve set the soundcore app to run in the background.
    3. Motion Boom Plus will restart automatically after upgrading.
  • How do I reset Motion Boom Plus?
    Turn on the speaker, then hold the Bluetooth and Volume + buttons for 5-8s.
  • I haven't used Motion Boom Plus for a while, why won't it turn on?
    If you haven't charged or used Motion Boom Plus in a long time, the battery may be over-discharged. Charge for at least one hour before turning it on.
  • Will Motion Boom Plus sink if it is dropped in water?
    No, Motion Boom Plus can float on the surface of the water.
  • How do I pair 2 Motion Boom Plus speakers together wirelessly via TWS?
    1. Turn on 2 Motion Boom Plus speakers and connect either one to your device via Bluetooth.
    2. Hold the Bluetooth button for 2-3s on both speakers until they flash white.
    3. Wait for 3-5s until you hear 'ding' sound. This means they are successfully paired.
    4. Once paired, the primary speaker will show a solid blue light, while the secondary speaker will show white light.
  • Does Motion Boom Plus have a built-in microphone?
    Yes.
  • How do I pair 2 Motion Boom Plus speakers together wirelessly via PartyCast?
    1. Turn on 2 Motion Boom Plus speakers and connect one to your device via Bluetooth.
    2. Press the PartyCast button on both speakers and you will see a solid white light.
    3. Wait for 3-5s until you hear a 'ding' sound. This means they are successfully paired.
    4. Once paired, the primary speaker will show solid white light, while the secondary speaker will show white light.
  • What do the indicator lights mean during charging?
    - Solid red light while charging.
    - Solid white light when fully charged.
  • Can I use Motion Boom Plus as a battery to charge other devices?
    Yes. There is a USB-A port for charging other devices.
  • How to recharge the speaker?
    You can use a USB-C wall charger with 5V/3A output to recharge.
  • How long does it take to fully recharge Motion Boom Plus?
    By using a 5V/3A USB-C wall charger, you can recharge to 100% in 5.5 hours.
  • What should I do if the speaker is not charging?
    To fix the charging issue, you can try the following steps:
    1. Wipe clean the tip of the charging cable.
    2. Try using a different cable or wall charger (5V/3A output) to recharge the speaker.
    3. Reset the speaker.
    4. Recharge for at least half an hour to prevent over-discharge.
  • What does it mean when the light flashes red?
    It means the battery is low.
  • What should I do if I fail to pair the speaker with my phone?
    1. Confirm that the speaker is fully charged and not paired with other devices.
    2. Forget all Bluetooth pairing records on your device.
    3. Reboot your speaker and your device.
    4. Disable and enable Bluetooth on your device.
    5. Reset the speaker.
    6. Try to connect the speaker to another device.
  • Is a PIN or Password needed when pairing soundcore Motion Boom Plus with a device?
    A PIN or password is not needed when pairing a soundcore speaker with a device. Hence, if you encounter an issue during the pairing process, please try these steps:
    1. Confirm that soundcore Motion Boom Plus is fully charged and not connected to other devices.
    2. Forget all Bluetooth pairing records on your device.
    3. Reboot your soundcore Motion Boom Plus and your device.
    4. Disable and then enable Bluetooth on your device.
    5. Reset soundcore Motion Boom Plus by holding the Bluetooth and Volume+ buttons at the same time for 5-10s until Motion Boom Plus restarts.
    6. Connect soundcore Motion Boom Plus to a different device.
  • How do I fix soundcore Motion Boom Plus's noise issues?
    1. Confirm that the speaker is fully charged.
    2. Reset the speaker.
    3. Reboot your speaker and your device.
    4. Try connecting the speaker to another device. If possible, try using another app or audio source.
    5. Ensure there are no physical objects interfering with the Bluetooth connection from the speaker to the device, such as a doorway or wall.
  • What should I do if soundcore Motion Boom Plus doesn't make any sound?
    1. Confirm that the speaker is fully charged.
    2. Reset the speaker.
    3. Restart your speaker and the device it is paired with to test again.
    4. Try connecting the speaker to a different device. If possible, try another app or audio source.
    5. Make sure the volume on both the speaker and the paired device are turned up.
  • How do I fix the no sound issue when soundcore Motion Boom Plus is paired with other PartyCast1.0 speakers?
    Double press the PartyCast button on soundcore Motion Boom Plus.
  • Declaration of Conformity

    A3129-EU DOC

    2024-02-28T10:02:25Z

    • How do I turn off Motion Boom Plus’s voice prompts?
      1. Connect your device to Motion Boom Plus.

      2. Open the soundcore app.

      3. Press "..." in the top right corner to access more options.

      4. Turn off voice prompts.
    • How do I upgrade Motion Boom Plus’s firmware via the soundcore app?
      1. Open the soundcore app and press 'Update Firmware'.

      2. Do not use your phone while the firmware is updating, except if you’ve set the soundcore app to run in the background.

      3. Motion Boom Plus will restart automatically after upgrading.
    • How do I reset Motion Boom Plus?
      Turn on the speaker, then hold the Bluetooth and Volume + buttons for 5-8s.
    • I haven't used Motion Boom Plus for a while, why won't it turn on?
      If you haven't charged or used Motion Boom Plus in a long time, the battery may be over-discharged. Charge for at least one hour before turning it on.
    • Will Motion Boom Plus sink if it is dropped in water?
      No, Motion Boom Plus can float on the surface of the water.
    • How do I pair 2 Motion Boom Plus speakers together wirelessly via TWS?
      1. Turn on 2 Motion Boom Plus speakers and connect either one to your device via Bluetooth.

      2. Hold the Bluetooth button for 2-3s on both speakers until they flash white.

      3. Wait for 3-5s until you hear 'ding' sound. This means they are successfully paired.

      4. Once paired, the primary speaker will show a solid blue light, while the secondary speaker will show white light.
    • Does Motion Boom Plus have a built-in microphone?
      Yes.
    • How do I pair 2 Motion Boom Plus speakers together wirelessly via PartyCast?
      1. Turn on 2 Motion Boom Plus speakers and connect one to your device via Bluetooth.

      2. Press the PartyCast button on both speakers and you will see a solid white light.

      3. Wait for 3-5s until you hear a 'ding' sound. This means they are successfully paired.

      4. Once paired, the primary speaker will show solid white light, while the secondary speaker will show white light.
    • What do the indicator lights mean during charging?
      - Solid red light while charging.

      - Solid white light when fully charged.
    • Can I use Motion Boom Plus as a battery to charge other devices?
      Yes. There is a USB-A port for charging other devices.
    • How to recharge the speaker?
      You can use a USB-C wall charger with 5V/3A output to recharge.
    • How long does it take to fully recharge Motion Boom Plus?
      By using a 5V/3A USB-C wall charger, you can recharge to 100% in 5.5 hours.
    • What should I do if the speaker is not charging?
      To fix the charging issue, you can try the following steps:

      1. Wipe clean the tip of the charging cable.

      2. Try using a different cable or wall charger (5V/3A output) to recharge the speaker.

      3. Reset the speaker.

      4. Recharge for at least half an hour to prevent over-discharge.
    • What does it mean when the light flashes red?
      It means the battery is low.
    • What should I do if I fail to pair the speaker with my phone?
      1. Confirm that the speaker is fully charged and not paired with other devices.

      2. Forget all Bluetooth pairing records on your device.

      3. Reboot your speaker and your device.

      4. Disable and enable Bluetooth on your device.

      5. Reset the speaker.

      6. Try to connect the speaker to another device.
    • Is a PIN or Password needed when pairing soundcore Motion Boom Plus with a device?
      A PIN or password is not needed when pairing a soundcore speaker with a device. Hence, if you encounter an issue during the pairing process, please try these steps:

      1. Confirm that soundcore Motion Boom Plus is fully charged and not connected to other devices.

      2. Forget all Bluetooth pairing records on your device.

      3. Reboot your soundcore Motion Boom Plus and your device.

      4. Disable and then enable Bluetooth on your device.

      5. Reset soundcore Motion Boom Plus by holding the Bluetooth and Volume+ buttons at the same time for 5-10s until Motion Boom Plus restarts.

      6. Connect soundcore Motion Boom Plus to a different device.
    • How do I fix soundcore Motion Boom Plus's noise issues?
      1. Confirm that the speaker is fully charged. 2. Reset the speaker. 3. Reboot your speaker and your device. 4. Try connecting the speaker to another device. If possible, try using another app or audio source. 5. Ensure there are no physical objects interfering with the Bluetooth connection from the speaker to the device, such as a doorway or wall.
    • What should I do if soundcore Motion Boom Plus doesn't make any sound?
      1. Confirm that the speaker is fully charged.

      2. Reset the speaker.

      3. Restart your speaker and the device it is paired with to test again.

      4. Try connecting the speaker to a different device. If possible, try another app or audio source.

      5. Make sure the volume on both the speaker and the paired device are turned up.
    • How do I fix the no sound issue when soundcore Motion Boom Plus is paired with other PartyCast1.0 speakers?
      Double press the PartyCast button on soundcore Motion Boom Plus.
    • Declaration of Conformity

      A3129-EU DOC

      2024-02-28T10:02:25Z

Customer Reviews

Based on 75 reviews
81%
(61)
19%
(14)
0%
(0)
0%
(0)
0%
(0)
M
MICHAEL LAMBOUL
Second produit de la marque Soundcore commandé et toujours satisfait !

Déjà séduit par la Motion plus commandée il y a quelques mois, j'ai tenté cette fois la Motion Boom Plus pour des performances en rapport avec une pièce plus grande et encore une belle surprise ! Les produits sont de très bonne qualité et tiennent vraiment les performances annoncées ! Parfait pour un prix maîtrisé par rapport à d'autres marques du marché. Je reprendrai la marque Soundcore pour un prochain achat sans aucun doute.

M
Mariia Lemish

Motion Boom Plus

v
vincent bergeon
Go for it

It’s very efficient for this size and the bass are really loud. Go for it you won’t regret it

T
TRONCIN Didier
appareil à acheter à tout pris

Rapport qualité prix excellent. Sono puissante et sans distorsion au niveau des basses

P
Patrice S.
Super son aisément transportable

Très bon équilibre entre les medium, les basses et les aigus. Pas de saturation à haut volume.

Vous pourriez également aimer

Connectez-vous pour recevoir le coupon ci-dessous
Désolé, votre compte contient des données sensibles. Veuillez vérifier votre compte par e-mail. Envoyer à nouveau Envoyer à nouveau seconds
S'inscrire
Déjà inscrit ? Connectez-vous maintenant
Connectez-vous à Soundcore
Connexion rapide
Connexion avec mot de passe
or
Veuillez réessayer dans 10 minutes.
Un e-mail de vérification a été envoyé à votre adresse e-mail, veuillez le vérifier.
Nous vous avons envoyé un e-mail de vérification
Veuillez consulter l'e-mail de vérification envoyé à

Vous devez vérifier votre compte.

Le lien de vérification est valide pour les 30 prochaines minutes.

Il peut y avoir quelques minutes de retard.

Vous pouvez définir votre mot de passe dans la section Mon Compte.

Vous pouvez utiliser le lien de vérification par e-mail pour vous connecter au site à chaque fois.

Vous n'avez pas reçu d'e-mail de vérification ? Envoyer à nouveau Envoyer à nouveau seconds
Retourner
OK
Connectez-vous à Soundcore
Adresse e-mail
Mot de passe
Mot de passe oublié?
Envoyer à nouveau Envoyer à nouveau seconds
or
Veuillez réessayer dans 10 minutes.
Un e-mail de vérification a été envoyé à votre adresse e-mail, veuillez le vérifier.
Nous vous avons envoyé un e-mail de vérification
Veuillez consulter l'e-mail de vérification envoyé à

Vous devez vérifier votre compte.

Le lien de vérification est valide pour les 30 prochaines minutes.

Il peut y avoir quelques minutes de retard.

Vous pouvez définir votre mot de passe dans la section Mon Compte.

Vous pouvez utiliser le lien de vérification par e-mail pour vous connecter au site à chaque fois.

Vous n'avez pas reçu d'e-mail de vérification ? Envoyer à nouveau Envoyer à nouveau seconds
Retourner
OK
Veuillez réessayer dans 10 minutes.
Un e-mail de vérification a été envoyé à votre adresse e-mail, veuillez le vérifier.
🎉 Bienvenue dans la communauté soundcore !
Profitez de votre coupon exclusif :
  • %
    de réduction
    Code: Copier
    Non cumulable avecd'autres réductions.

1. Nous avons envoyé votre mot de passe initial ainsi que votre coupon à votre adresse e-mail.

2. Verify your email address for account security and credit distribution.Envoyer à nouveau Envoyer à nouveau seconds
Compris
Échec de l'inscription
Malheureusement, le lien ne fonctionne pas, veuillez vous réinscrire.
OK
Entrez votre numéro de mobile pour recevoir des notifications par SMS.
En vous abonnant, vous acceptez de recevoir des messages texte et des appels téléphoniques promotionnels automatisés récurrents et personnalisés de la part de soundcore au numéro de téléphone fourni. Le consentement n'est pas une condition d'achat. Répondez AIDE pour de l'aide et STOP pour vous désabonner. La fréquence des messages variera. Des tarifs de messages et de données peuvent s'appliquer. Consultez les Conditions et la Politique de confidentialité.
numéro de mobile
*There seems to be something wrong.9999999999
The interface returns failure and will be skipped after9999999999 5 seconds.
S'abonner
Passer