Casque Space One | Réduction du bruit avancée
99,99€
Casque Space One | Réduction du bruit avancée
poster

Comparaison

Space One Q30 Q35 Space Q45
Son Hi-Res Wireless, Hi-Res Hi-Res, EQ Personnalisé Hi-Res Wireless, Hi-Res, LDAC Hi-Res Wireless, Hi-Res, LDAC
Réduction active du bruit ANC adaptatif ANC hybride avec pls modes ANC hybride avec pls modes ANC adaptatif
Détection du port
Autonomie 55H (ANC off), 40H (ANC on) 60H (ANC off), 40H (ANC on) 60H (ANC off), 40H (ANC on) 65H (ANC off), 50H (ANC on)
Charge rapide 5 min = 4 h 5 min = 4 h 5 min = 4 h 5 min = 4 h
Connectivité Bluetooth 5.3, AUX Bluetooth 5, AUX, NFC Bluetooth 5,AUX avec micro,NFC Bluetooth 5.3, AUX
Appels 3 micros avec algorithme IA 2 micros 2 micros avec algorithme IA 2 micros avec algorithme IA
Application soundcore

FAQ

  • What's in the box?
    Motion 300 Speaker
    60 cm USB-C to C Cable
    Safety Card&Quick Start Guide

    Note: Wall charger not included.
  • Does Motion 300 support AUX input?
    No
  • Can Motion 300 partycast pair with other model speakers, such as the Motion+ speaker?
    No, however, Motion 300 can pair with another Motion 300 speaker via TWS.
  • What's the playtime of Motion 300?
    13-hour battery life is based on measurements taken at 50% volume and with Bass Mode off. The actual
    battery life may vary depending on factors such as the type of content being played, custom EQ settings,
    and volume level.
  • Is Motion 300 waterproof?
    Motion 300 supports IPX7 waterproofing, but before submerging it in water, it is necessary to ensure that
    the waterproof cover is sealed tightly.
  • How long does it take to charge Motion 300?
    It takes around 4 hours to charge with a certified 5V/3A (15W) wall charger.
  • What does the power indicator light on Motion 300 look like when charging?
    When charging, the power indicator light stays red. When fully charged, it stays white.
  • Why is the power button recessed?
    The recessed design make it easy to use the button in low-light and dark environments.
  • How many speakers does Motion 300 have?
    Motion 300 has two 15W full-range speakers.
  • What is the output power of Motion 300?
    30W
  • How do I reset Motion 300?
    Turn on the speaker then hold down the "Bluetooth" and "Volume +" buttons for 5- 10 seconds. You'll hear a
    prompt and the speaker will automatically restart.
  • Does Motion 300 have a built-in microphone?
    Yes. Motion 300 is equipped with a microphone, located on the top left.
  • What Bluetooth version does Motion 300 use?
    Bluetooth 5.3.
  • Which Bluetooth codecs does Motion 300 support?
    Motion 300 supports LDAC, SBC, and MPEG2 AAC LC Bluetooth codecs.
  • How can I extend Motion 300's battery life?
    Here are some tips on how to improve battery life:
    1. Do not completely discharge the battery before recharging.
    2. Recharge the battery as soon as possible when the low-battery indicator is on.
    3. Stop charging once the battery is fully charged (to minimize recharging cycles).
    4. Do not expose the speaker to harsh environments with extremely hot or cold temperatures.
    5. Recharge the speaker regularly (once every 3 months) if it has not been used for a prolonged period.
  • How do I update Motion 300's firmware?
    1. Open the soundcore app and go to 'Update Firmware'.
    2. Do not use your phone while the firmware is updating, except if you've set the soundcore app to run in
    the background.
    3. Motion 300 will restart automatically after updating.
  • What is SmartTune?
    The speaker can recognize its own position (such as standing, lying, hanging), and automatically change
    the EQ to deliver the best possible sound for that situation.
  • What does Hi-Res mean?
    Hi-Res is an abbreviation for High Resolution Audio, which is an audio format with superior sound quality
    that retains more audio detail. Hi-Res allows you to better enjoy music with Motion 300.
  • What is LDAC? Why don't I see the LDAC option?
    LDAC is a Bluetooth encoding format that can transmit 3 times the amount of data of the ordinary SBC
    Bluetooth codec.

    Note: LDAC only works on devices running Android 8.0 or above; it does not work on iPhone.
  • Does the LDAC mode affect Bluetooth connectivity?
    LDAC affecting Bluetooth performance is a common issue. However, as long as there is little interference
    around and the Bluetooth device is not far from the speaker, Bluetooth should work properly.
  • What is TWS function and does Motion 300 support it?
    TWS stands for True Wireless Stereo, and it allows two identicial speakers to play stereo sound after
    pairing up. Motion 300 supports TWS.
  • How can I pair two Motion 300 speakers at the same time via TWS?
    Method 1
    1. Speaker 1 and Speaker 2: Long press the power button to turn on both speakers.
    2. Speaker 1: Hold the Bluetooth button until the button light flashes white.
    3. Speaker 2: Hold the Bluetooth button until the button light flashes white.
    4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
    5. The primary speaker is the one with the blue light.
    6. Use the primary speaker to pair with your device.

    Method 2
    1. Long press the power button to turn on both speakers.
    2. Connect either speaker with your Bluetooth device.
    3. On both speakers, press and hold the Bluetooth button for at least 2 seconds to enter TWS pairing mode.
    4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
  • Manual

    A3135-Manual

    2023-10-19

  • Declaration of Conformity

    A3135-DOC

    2023-11-07

    • What's in the box?
      Motion 300 Speaker 60 cm USB-C to C Cable Safety Card&Quick Start Guide Note: Wall charger not included.
    • Does Motion 300 support AUX input?
      No
    • Can Motion 300 partycast pair with other model speakers, such as the Motion+ speaker?
      No, however, Motion 300 can pair with another Motion 300 speaker via TWS.
    • What's the playtime of Motion 300?
      13-hour battery life is based on measurements taken at 50% volume and with Bass Mode off. The actual battery life may vary depending on factors such as the type of content being played, custom EQ settings, and volume level.
    • Is Motion 300 waterproof?
      Motion 300 supports IPX7 waterproofing, but before submerging it in water, it is necessary to ensure that the waterproof cover is sealed tightly.
    • How long does it take to charge Motion 300?
      It takes around 4 hours to charge with a certified 5V/3A (15W) wall charger.
    • What does the power indicator light on Motion 300 look like when charging?
      When charging, the power indicator light stays red. When fully charged, it stays white.
    • Why is the power button recessed?
      The recessed design make it easy to use the button in low-light and dark environments.
    • How many speakers does Motion 300 have?
      Motion 300 has two 15W full-range speakers.
    • What is the output power of Motion 300?
      30W
    • How do I reset Motion 300?
      Turn on the speaker then hold down the "Bluetooth" and "Volume +" buttons for 5- 10 seconds. You'll hear a prompt and the speaker will automatically restart.
    • Does Motion 300 have a built-in microphone?
      Yes. Motion 300 is equipped with a microphone, located on the top left.
    • What Bluetooth version does Motion 300 use?
      Bluetooth 5.3.
    • Which Bluetooth codecs does Motion 300 support?
      Motion 300 supports LDAC, SBC, and MPEG2 AAC LC Bluetooth codecs.
    • How can I extend Motion 300's battery life?
      Here are some tips on how to improve battery life: 1. Do not completely discharge the battery before recharging. 2. Recharge the battery as soon as possible when the low-battery indicator is on. 3. Stop charging once the battery is fully charged (to minimize recharging cycles). 4. Do not expose the speaker to harsh environments with extremely hot or cold temperatures. 5. Recharge the speaker regularly (once every 3 months) if it has not been used for a prolonged period.
    • How do I update Motion 300's firmware?
      1. Open the soundcore app and go to 'Update Firmware'. 2. Do not use your phone while the firmware is updating, except if you've set the soundcore app to run in the background. 3. Motion 300 will restart automatically after updating.
    • What is SmartTune?
      The speaker can recognize its own position (such as standing, lying, hanging), and automatically change the EQ to deliver the best possible sound for that situation.
    • What does Hi-Res mean?
      Hi-Res is an abbreviation for High Resolution Audio, which is an audio format with superior sound quality that retains more audio detail. Hi-Res allows you to better enjoy music with Motion 300.
    • What is LDAC? Why don't I see the LDAC option?
      LDAC is a Bluetooth encoding format that can transmit 3 times the amount of data of the ordinary SBC Bluetooth codec. Note: LDAC only works on devices running Android 8.0 or above; it does not work on iPhone.
    • Does the LDAC mode affect Bluetooth connectivity?
      LDAC affecting Bluetooth performance is a common issue. However, as long as there is little interference around and the Bluetooth device is not far from the speaker, Bluetooth should work properly.
    • What is TWS function and does Motion 300 support it?
      TWS stands for True Wireless Stereo, and it allows two identicial speakers to play stereo sound after pairing up. Motion 300 supports TWS.
    • How can I pair two Motion 300 speakers at the same time via TWS?
      Method 1 1. Speaker 1 and Speaker 2: Long press the power button to turn on both speakers. 2. Speaker 1: Hold the Bluetooth button until the button light flashes white. 3. Speaker 2: Hold the Bluetooth button until the button light flashes white. 4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully. 5. The primary speaker is the one with the blue light. 6. Use the primary speaker to pair with your device. Method 2 1. Long press the power button to turn on both speakers. 2. Connect either speaker with your Bluetooth device. 3. On both speakers, press and hold the Bluetooth button for at least 2 seconds to enter TWS pairing mode. 4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
    • Manual

      A3135-Manual

      2023-10-19

    • Declaration of Conformity

      A3135-DOC

      2023-11-07

  • What's in the box?
    Motion 300 Speaker
    60 cm USB-C to C Cable
    Safety Card&Quick Start Guide

    Note: Wall charger not included.
  • Does Motion 300 support AUX input?
    No
  • Can Motion 300 partycast pair with other model speakers, such as the Motion+ speaker?
    No, however, Motion 300 can pair with another Motion 300 speaker via TWS.
  • What's the playtime of Motion 300?
    13-hour battery life is based on measurements taken at 50% volume and with Bass Mode off. The actual
    battery life may vary depending on factors such as the type of content being played, custom EQ settings,
    and volume level.
  • Is Motion 300 waterproof?
    Motion 300 supports IPX7 waterproofing, but before submerging it in water, it is necessary to ensure that
    the waterproof cover is sealed tightly.
  • How long does it take to charge Motion 300?
    It takes around 4 hours to charge with a certified 5V/3A (15W) wall charger.
  • What does the power indicator light on Motion 300 look like when charging?
    When charging, the power indicator light stays red. When fully charged, it stays white.
  • Why is the power button recessed?
    The recessed design make it easy to use the button in low-light and dark environments.
  • How many speakers does Motion 300 have?
    Motion 300 has two 15W full-range speakers.
  • What is the output power of Motion 300?
    30W
  • How do I reset Motion 300?
    Turn on the speaker then hold down the "Bluetooth" and "Volume +" buttons for 5- 10 seconds. You'll hear a
    prompt and the speaker will automatically restart.
  • Does Motion 300 have a built-in microphone?
    Yes. Motion 300 is equipped with a microphone, located on the top left.
  • What Bluetooth version does Motion 300 use?
    Bluetooth 5.3.
  • Which Bluetooth codecs does Motion 300 support?
    Motion 300 supports LDAC, SBC, and MPEG2 AAC LC Bluetooth codecs.
  • How can I extend Motion 300's battery life?
    Here are some tips on how to improve battery life:
    1. Do not completely discharge the battery before recharging.
    2. Recharge the battery as soon as possible when the low-battery indicator is on.
    3. Stop charging once the battery is fully charged (to minimize recharging cycles).
    4. Do not expose the speaker to harsh environments with extremely hot or cold temperatures.
    5. Recharge the speaker regularly (once every 3 months) if it has not been used for a prolonged period.
  • How do I update Motion 300's firmware?
    1. Open the soundcore app and go to 'Update Firmware'.
    2. Do not use your phone while the firmware is updating, except if you've set the soundcore app to run in
    the background.
    3. Motion 300 will restart automatically after updating.
  • What is SmartTune?
    The speaker can recognize its own position (such as standing, lying, hanging), and automatically change
    the EQ to deliver the best possible sound for that situation.
  • What does Hi-Res mean?
    Hi-Res is an abbreviation for High Resolution Audio, which is an audio format with superior sound quality
    that retains more audio detail. Hi-Res allows you to better enjoy music with Motion 300.
  • What is LDAC? Why don't I see the LDAC option?
    LDAC is a Bluetooth encoding format that can transmit 3 times the amount of data of the ordinary SBC
    Bluetooth codec.

    Note: LDAC only works on devices running Android 8.0 or above; it does not work on iPhone.
  • Does the LDAC mode affect Bluetooth connectivity?
    LDAC affecting Bluetooth performance is a common issue. However, as long as there is little interference
    around and the Bluetooth device is not far from the speaker, Bluetooth should work properly.
  • What is TWS function and does Motion 300 support it?
    TWS stands for True Wireless Stereo, and it allows two identicial speakers to play stereo sound after
    pairing up. Motion 300 supports TWS.
  • How can I pair two Motion 300 speakers at the same time via TWS?
    Method 1
    1. Speaker 1 and Speaker 2: Long press the power button to turn on both speakers.
    2. Speaker 1: Hold the Bluetooth button until the button light flashes white.
    3. Speaker 2: Hold the Bluetooth button until the button light flashes white.
    4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
    5. The primary speaker is the one with the blue light.
    6. Use the primary speaker to pair with your device.

    Method 2
    1. Long press the power button to turn on both speakers.
    2. Connect either speaker with your Bluetooth device.
    3. On both speakers, press and hold the Bluetooth button for at least 2 seconds to enter TWS pairing mode.
    4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
  • Manual

    A3135-Manual

    2023-10-19

  • Declaration of Conformity

    A3135-DOC

    2023-11-07

    • What's in the box?
      Motion 300 Speaker 60 cm USB-C to C Cable Safety Card&Quick Start Guide Note: Wall charger not included.
    • Does Motion 300 support AUX input?
      No
    • Can Motion 300 partycast pair with other model speakers, such as the Motion+ speaker?
      No, however, Motion 300 can pair with another Motion 300 speaker via TWS.
    • What's the playtime of Motion 300?
      13-hour battery life is based on measurements taken at 50% volume and with Bass Mode off. The actual battery life may vary depending on factors such as the type of content being played, custom EQ settings, and volume level.
    • Is Motion 300 waterproof?
      Motion 300 supports IPX7 waterproofing, but before submerging it in water, it is necessary to ensure that the waterproof cover is sealed tightly.
    • How long does it take to charge Motion 300?
      It takes around 4 hours to charge with a certified 5V/3A (15W) wall charger.
    • What does the power indicator light on Motion 300 look like when charging?
      When charging, the power indicator light stays red. When fully charged, it stays white.
    • Why is the power button recessed?
      The recessed design make it easy to use the button in low-light and dark environments.
    • How many speakers does Motion 300 have?
      Motion 300 has two 15W full-range speakers.
    • What is the output power of Motion 300?
      30W
    • How do I reset Motion 300?
      Turn on the speaker then hold down the "Bluetooth" and "Volume +" buttons for 5- 10 seconds. You'll hear a prompt and the speaker will automatically restart.
    • Does Motion 300 have a built-in microphone?
      Yes. Motion 300 is equipped with a microphone, located on the top left.
    • What Bluetooth version does Motion 300 use?
      Bluetooth 5.3.
    • Which Bluetooth codecs does Motion 300 support?
      Motion 300 supports LDAC, SBC, and MPEG2 AAC LC Bluetooth codecs.
    • How can I extend Motion 300's battery life?
      Here are some tips on how to improve battery life: 1. Do not completely discharge the battery before recharging. 2. Recharge the battery as soon as possible when the low-battery indicator is on. 3. Stop charging once the battery is fully charged (to minimize recharging cycles). 4. Do not expose the speaker to harsh environments with extremely hot or cold temperatures. 5. Recharge the speaker regularly (once every 3 months) if it has not been used for a prolonged period.
    • How do I update Motion 300's firmware?
      1. Open the soundcore app and go to 'Update Firmware'. 2. Do not use your phone while the firmware is updating, except if you've set the soundcore app to run in the background. 3. Motion 300 will restart automatically after updating.
    • What is SmartTune?
      The speaker can recognize its own position (such as standing, lying, hanging), and automatically change the EQ to deliver the best possible sound for that situation.
    • What does Hi-Res mean?
      Hi-Res is an abbreviation for High Resolution Audio, which is an audio format with superior sound quality that retains more audio detail. Hi-Res allows you to better enjoy music with Motion 300.
    • What is LDAC? Why don't I see the LDAC option?
      LDAC is a Bluetooth encoding format that can transmit 3 times the amount of data of the ordinary SBC Bluetooth codec. Note: LDAC only works on devices running Android 8.0 or above; it does not work on iPhone.
    • Does the LDAC mode affect Bluetooth connectivity?
      LDAC affecting Bluetooth performance is a common issue. However, as long as there is little interference around and the Bluetooth device is not far from the speaker, Bluetooth should work properly.
    • What is TWS function and does Motion 300 support it?
      TWS stands for True Wireless Stereo, and it allows two identicial speakers to play stereo sound after pairing up. Motion 300 supports TWS.
    • How can I pair two Motion 300 speakers at the same time via TWS?
      Method 1 1. Speaker 1 and Speaker 2: Long press the power button to turn on both speakers. 2. Speaker 1: Hold the Bluetooth button until the button light flashes white. 3. Speaker 2: Hold the Bluetooth button until the button light flashes white. 4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully. 5. The primary speaker is the one with the blue light. 6. Use the primary speaker to pair with your device. Method 2 1. Long press the power button to turn on both speakers. 2. Connect either speaker with your Bluetooth device. 3. On both speakers, press and hold the Bluetooth button for at least 2 seconds to enter TWS pairing mode. 4. Wait for a few seconds, and you will hear a sound when the two speakers have paired successfully.
    • Manual

      A3135-Manual

      2023-10-19

    • Declaration of Conformity

      A3135-DOC

      2023-11-07

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
T
Tanguy Desurmont

Casque Space One | Réduction du bruit avancée

S
Syed Najaf

Best headphones ever

C
Customer

Casque Space One | Réduction de bruit active avancée

Y
Yves Nivot

Space One

Vous pourriez également aimer

Connectez-vous pour recevoir le coupon ci-dessous
Désolé, votre compte contient des données sensibles. Veuillez vérifier votre compte par e-mail. Envoyer à nouveau Envoyer à nouveau seconds
S'inscrire
Déjà inscrit ? Connectez-vous maintenant
Connectez-vous à Soundcore
Connexion rapide
Connexion avec mot de passe
or
Veuillez réessayer dans 10 minutes.
Un e-mail de vérification a été envoyé à votre adresse e-mail, veuillez le vérifier.
Nous vous avons envoyé un e-mail de vérification
Veuillez consulter l'e-mail de vérification envoyé à

Vous devez vérifier votre compte.

Le lien de vérification est valide pour les 30 prochaines minutes.

Il peut y avoir quelques minutes de retard.

Vous pouvez définir votre mot de passe dans la section Mon Compte.

Vous pouvez utiliser le lien de vérification par e-mail pour vous connecter au site à chaque fois.

Vous n'avez pas reçu d'e-mail de vérification ? Envoyer à nouveau Envoyer à nouveau seconds
Retourner
OK
Connectez-vous à Soundcore
Adresse e-mail
Mot de passe
Mot de passe oublié?
Envoyer à nouveau Envoyer à nouveau seconds
or
Veuillez réessayer dans 10 minutes.
Un e-mail de vérification a été envoyé à votre adresse e-mail, veuillez le vérifier.
Nous vous avons envoyé un e-mail de vérification
Veuillez consulter l'e-mail de vérification envoyé à

Vous devez vérifier votre compte.

Le lien de vérification est valide pour les 30 prochaines minutes.

Il peut y avoir quelques minutes de retard.

Vous pouvez définir votre mot de passe dans la section Mon Compte.

Vous pouvez utiliser le lien de vérification par e-mail pour vous connecter au site à chaque fois.

Vous n'avez pas reçu d'e-mail de vérification ? Envoyer à nouveau Envoyer à nouveau seconds
Retourner
OK
Veuillez réessayer dans 10 minutes.
Un e-mail de vérification a été envoyé à votre adresse e-mail, veuillez le vérifier.
🎉 Bienvenue dans la communauté soundcore !
Profitez de votre coupon exclusif :
  • %
    de réduction
    Code: Copier
    Non cumulable avecd'autres réductions.

1. Nous avons envoyé votre mot de passe initial ainsi que votre coupon à votre adresse e-mail.

2. Verify your email address for account security and credit distribution.Envoyer à nouveau Envoyer à nouveau seconds
Compris
Échec de l'inscription
Malheureusement, le lien ne fonctionne pas, veuillez vous réinscrire.
OK
Entrez votre numéro de mobile pour recevoir des notifications par SMS.
En vous abonnant, vous acceptez de recevoir des messages texte et des appels téléphoniques promotionnels automatisés récurrents et personnalisés de la part de soundcore au numéro de téléphone fourni. Le consentement n'est pas une condition d'achat. Répondez AIDE pour de l'aide et STOP pour vous désabonner. La fréquence des messages variera. Des tarifs de messages et de données peuvent s'appliquer. Consultez les Conditions et la Politique de confidentialité.
numéro de mobile
*There seems to be something wrong.9999999999
The interface returns failure and will be skipped after9999999999 5 seconds.
S'abonner
Passer