Liberty 4 | Écouteurs sans fil haute qualité
Épuisé
Liberty 4 | Écouteurs sans fil haute qualité
poster

FAQ

  • How to wear Liberty 4 and change eartips?
  • How to use squeeze control on Liberty 4?
  • How to use Spatial Audio with Liberty 4?
  • How to use Liberty 4 Wellness features?
  • How to re-pair and reset Liberty 4?
  • How do I wear Liberty 4 correctly?
    -Liberty 4 comes with 4 sizes of ear wings and ear tips in S, M, M2, L. M2 is longer than the standard M size and fits deeper in your ear canal. Choose a size that fits your ears best.
    - Ensure you are wearing the left and right earbuds on the correct side.
    - If you're still not sure about the fit, take the Fit Test in the soundcore app.
  • Can I use other third-party ear tips with Liberty 4?
    No. Due to the heart rate tracking related function, the ear tips need to be transparent. Changing to third-party ear tips will affect the heart rate function. If necessary, please contact our customer support team for replacement ear tips.
  • How do I use squeeze control?
    1. Ensure you are wearing the earbuds correctly and they have detected that you are wearing them.
    2. Pinch the lower end of the earphone handle (at the groove) with two fingers. You'll hear a "click" sound to signify that the operation was successful.
    3.You can customize the controls and the squeeze force in the soundcore app.
  • How do I turn the earbuds on and off?
    Turn On:
    Slide up to open the charging case to automatically turn on Liberty 4.
    Turn Off:
    - Put the earbuds back into the charging case. The earbuds will disconnect after 10 seconds.
    - The earbuds will also turn off automatically when the earbuds are outside the case, not being worn, and have been disconnected from your device for 30 minutes. (The auto power off time can be customized in the soundcore app.)
    - When you are wearing the earbuds, they will only turn off when the battery runs out.
  • How can I adjust Liberty 4's volume via the earbuds?
    You can customize the controls according to your preferences via the app.
    1. Go to the App Store or Google Play to download the soundcore app.
    2. Pair your device with Liberty 4.
    3. Open the soundcore app to connect with Liberty 4.
    4. Select "Controls."
    5. Customize the controls according to your preferences.
    Note: Customized controls are not available when using a single earbud.
  • How do I switch to the next track/previous track?
    By default, triple-press the right earbud to go to the next track, and triple-press the left earbud to go to the previous track.
    You can customize the controls according to your preferences via the app.
    1. Go to the App Store or Google Play to download the soundcore app.
    2. Pair your device with Liberty 4.
    3. Open the soundcore app to connect with Liberty 4.
    4. Select "Controls."
    5. Customize the controls according to your preferences.
  • How do I play/pause audio?
    By default, press either earphone to play/pause audio.
    You can customize the controls according to your preferences via the app.
    1. Go to the App Store or Google Play to download the soundcore app.
    2. Pair your device with Liberty 4.
    3. Open the soundcore app to connect with Liberty 4.
    4. Select "Controls."
    5. Customize the controls according to your preferences.
    Note: The music will automatically pause if you remove the earbuds. To start playing again, wear the earbuds.
  • Can I use the left or right earbud on its own?
    Yes, remove one earbud from the charging case to use. If you are using two earbuds, you can put the earbud you don't want to use into the charging case and continue using the other one on its own.
    Note: If you are wearing two earbuds and listening in ANC mode, it will automatically switch to Normal mode when you return one earbud to the charging case. You can customize the settings in the app if you want to use ANC mode when using one earbud.
    If you wear the second earbud again, Normal mode will automatically switch back to ANC mode.
  • How do I trigger my phone's voice assistant via Liberty 4?
    Go to Settings > Controls in the soundcore app and choose a custom command for voice assistants.
  • How do I switch between ANC and Transparency modes?
    Double-press the pressure-sensitive button on the left or right earbud until you hear a "click" sound. You can add Normal mode as a custom command via the app.
  • How do I reset my Liberty 4?
    Place the earbuds in the charging case and leave the case open, then press and hold the button on the case for 10 seconds until the LED indicators flash white rapidly three times.
  • What should I do if any of the following problems occur?
    - Only one earbud has sound.
    - One side does not pair with the other side or my device.
    - No music plays after connecting with my device.
    - Cannot pair or reconnect with my device.
    Put the earbuds into the charging case and close for 10 seconds, then open the charging case to try pairing again.
    If that doesn't work, try the following:
    1) Forget the Bluetooth pairing record on your device if you have previously connected the earbuds.
    2) Place the earbuds in the charging case and leave the cover open.
    3) Press the reset button for 3s, the light inside the case will flash once per second, then re-pair with the device. After paring successfully, the light inside the case will stay on for 1s, then breathe in and out over 4 seconds.
    If you want to connect to a new device, you need to long press and hold the reset button for 10s until you see the light effects inside the case.
    4) Turn off your device's Bluetooth and turn it on again to pair with "soundcore Liberty 4".
  • What should I do if Liberty 4 disconnects or the sound is choppy?
    Some environments (such as airports, offices, subways, crowded public spaces, etc.) can interfere with your Bluetooth connection. To optimize your Bluetooth connection:
    1. Download videos and songs instead of streaming, as it may be related to the network environment.
    2. If you have an Android phone, temporarily disable unnecessary app traffic settings on your phone.
    Or you can try:
    - Resetting the earbuds. See "How do I reset Liberty 4?"
    - Try a different device if possible.
  • How do I enable dual connections on Liberty 4?
    The earbuds can connect with two devices at the same time so you can switch between them effortlessly. To pair with another device, go to Settings > Dual Connections > Connect New Device.
  • Does the case support wireless charging?
    Yes, place the case on the wireless charging pad and make sure it's closed and centrally aligned.
  • What is Liberty 4's playtime from a single charge?
    Normal Mode: Up to 9 hours on a single charge/28 hours with the charging case.
    Noise Cancelling Mode: Up to 7 hours on a single charge/24 hours with charging case.
    Transparency Mode: Up to 7 hours on a single charge/24 hours with charging case.
    Call: Up to 5 hours on a single charge/15 hours with charging case.
  • What should I do if any of the following problems occur?
    - The earbuds don’t recharge in the charging case.
    - The earbuds keep connecting to the device even after being put back in the charging case with the cover closed.
    - The earbuds don't turn on when taken out of the charging case.
    1. Confirm the charging case has power left.
    2. Clean the charging pins with a dry cloth and rubbing alcohol to ensure all charging pins on the earbuds and charging case are completely clean and dry of sweat and water. Then put the earbuds into the case.
    3. Make sure the earbuds are in place. The LED light will breathe in and out to indicate that the earbuds are charging.
  • How long does it take to fully charge the earbuds?
    1 hour.
  • How long does it take to fully charge the charging case?
    2 hours.
  • What audio codecs do Liberty 4 support?
    SBC, AAC, and LDAC.
  • What should I do if Liberty 4's noise cancellation performance does not meet my expectations?
    Here are some tips for enhancing the sound quality and noise cancellation:
    1) Try other sizes of ear tips to ensure you're using one that fits well and creates a tight seal.
    2) Make sure you're wearing the earbuds in the correct position so that they create a tight seal. To check if you're wearing the earbuds in the perfect position, take the Fit Test on the soundcore app.
    3) Take the HearID ANC test to personalize the noise cancelling effect.
    4) Try different ANC modes to see which one suits your environment best.
    Note: In a noisy environment and at high volume, you may feel that the noise cancellation performance is not as strong.
  • How do I enable LDAC?
    1. Download and update your soundcore app to latest version.
    2. Change the sound mode to "Preferred Audio Quality" and follow the instructions to update to the latest firmware version. The LDAC codec is now enabled and will work with your LDAC compatible device. Note: The LDAC codec processing will increase the power consumption and decrease the overall playtime. Only devices with Android 8.0 or later support LDAC.
    LDAC is restricted by Bluetooth bandwidth and is not supported when using multipoint connection.
  • What should I do if the left and right earbuds are in different modes? For example one is in Normal mode and the other is in ANC or Transparency mode.
    1. Put the earbuds back into the charging case at the same time, then close the charging case for at least 3 seconds and wear them again.
    2. Reset the earbuds, see "How do I reset Liberty 4?
  • How do I enable Spatial Audio?
    1. Wear the earbuds.
    2. Enter the soundcore app and connect Liberty 4.
    3. Select Spatial Audio.
    4. Spatial Audio cannot be turned on while sound effects are turned on.
    5. Select Movie or Music mode to adjust the sense of distance while listening to different types of audio content.
  • How do I use soundcore Wellness?
    1. Select soundcore Wellness in the soundcore app.
    2. The information settings will pop up automatically when you enter soundcore Wellness for the first time. In order to get the most out of soundcore Wellness, add your personal information.
    Note: Your information is for your personal use only.
    3. Select the person icon on the top right of the screen to set or change information if needed.
  • Why is my heart rate is always calibrating?
    1. Once you remove Liberty 4 from the charging case, automatic calibration is needed in order to ensure the accuracy of the heart rate sensor.
    2. You can toggle manual calibration in the app if you prefer.
  • What should I do if there is no test data when I wear a single earbud only?
    The heart rate sensor is built into the right earbud, so it only works when you wear the right earbud.
  • Is the sensor harmful to my body?
    The heart rate sensor detects the flow of blood in the subcutaneous blood vessels through an optical sensor, and it does so without causing damage to your body.
  • What does the red light on the right earbud mean?
    When measuring blood oxygen, the right ear headset will light up red.
  • Can I measure heart rate and stress without using the soundcore app?
    You need to wear your Liberty 4 and keep the soundcore app open to measure your heart rate and stress changes while using the earbuds.
  • Why is my stress level constantly being detected?
    After activating the app, when you wear Liberty 4 and the App is running, your stress will be automatically detected, so you can check it at any time.
    In the stress detection part of the app, you can turn off the real-time stress detection if you want.
  • Why is my heart rate being monitored constantly?
    After activating soundcore Wellness, your heart rate will be automatically detected when you wear Liberty 4 and the app is running, so you can check it at any time.
    You can choose to turn off real-time heart rate detection via the heart rate display. This will stop continuous monitoring of your heart rate.
  • Why is the heart rate test value from Liberty 4 different from the value on my other heart rate monitoring devices?
    soundcore Liberty 4 earbuds and the associated soundcore app are not intended for medical purposes, including self-diagnosis and medical consultation, and is suitable for general fitness and wellness use only.
  • Declaration of Conformity

    A3953_EU DOC Form

    2022-10-27

    • How to wear Liberty 4 and change eartips?
    • How to use squeeze control on Liberty 4?
    • How to use Spatial Audio with Liberty 4?
    • How to use Liberty 4 Wellness features?
    • How to re-pair and reset Liberty 4?
    • How do I wear Liberty 4 correctly?
      -Liberty 4 comes with 4 sizes of ear wings and ear tips in S, M, M2, L. M2 is longer than the standard M size and fits deeper in your ear canal. Choose a size that fits your ears best.

      - Ensure you are wearing the left and right earbuds on the correct side.

      - If you're still not sure about the fit, take the Fit Test in the soundcore app.
    • Can I use other third-party ear tips with Liberty 4?
      No. Due to the heart rate tracking related function, the ear tips need to be transparent. Changing to third-party ear tips will affect the heart rate function. If necessary, please contact our customer support team for replacement ear tips.
    • How do I use squeeze control?
      1. Ensure you are wearing the earbuds correctly and they have detected that you are wearing them.

      2. Pinch the lower end of the earphone handle (at the groove) with two fingers. You'll hear a "click" sound to signify that the operation was successful.

      3.You can customize the controls and the squeeze force in the soundcore app.
    • How do I turn the earbuds on and off?
      Turn On:

      Slide up to open the charging case to automatically turn on Liberty 4.

      Turn Off:

      - Put the earbuds back into the charging case. The earbuds will disconnect after 10 seconds.

      - The earbuds will also turn off automatically when the earbuds are outside the case, not being worn, and have been disconnected from your device for 30 minutes. (The auto power off time can be customized in the soundcore app.)

      - When you are wearing the earbuds, they will only turn off when the battery runs out.
    • How can I adjust Liberty 4's volume via the earbuds?
      You can customize the controls according to your preferences via the app.

      1. Go to the App Store or Google Play to download the soundcore app.

      2. Pair your device with Liberty 4.

      3. Open the soundcore app to connect with Liberty 4.

      4. Select "Controls."

      5. Customize the controls according to your preferences.

      Note: Customized controls are not available when using a single earbud.
    • How do I switch to the next track/previous track?
      By default, triple-press the right earbud to go to the next track, and triple-press the left earbud to go to the previous track.

      You can customize the controls according to your preferences via the app.

      1. Go to the App Store or Google Play to download the soundcore app.

      2. Pair your device with Liberty 4.

      3. Open the soundcore app to connect with Liberty 4.

      4. Select "Controls."

      5. Customize the controls according to your preferences.
    • How do I play/pause audio?
      By default, press either earphone to play/pause audio.

      You can customize the controls according to your preferences via the app.

      1. Go to the App Store or Google Play to download the soundcore app.

      2. Pair your device with Liberty 4.

      3. Open the soundcore app to connect with Liberty 4.

      4. Select "Controls."

      5. Customize the controls according to your preferences.


      Note: The music will automatically pause if you remove the earbuds. To start playing again, wear the earbuds.
    • Can I use the left or right earbud on its own?
      Yes, remove one earbud from the charging case to use. If you are using two earbuds, you can put the earbud you don't want to use into the charging case and continue using the other one on its own.

      Note: If you are wearing two earbuds and listening in ANC mode, it will automatically switch to Normal mode when you return one earbud to the charging case. You can customize the settings in the app if you want to use ANC mode when using one earbud.

      If you wear the second earbud again, Normal mode will automatically switch back to ANC mode.
    • How do I trigger my phone's voice assistant via Liberty 4?
      Go to Settings > Controls in the soundcore app and choose a custom command for voice assistants.
    • How do I switch between ANC and Transparency modes?
      Double-press the pressure-sensitive button on the left or right earbud until you hear a "click" sound. You can add Normal mode as a custom command via the app.
    • How do I reset my Liberty 4?
      Place the earbuds in the charging case and leave the case open, then press and hold the button on the case for 10 seconds until the LED indicators flash white rapidly three times.
    • What should I do if any of the following problems occur?
      - Only one earbud has sound.
      - One side does not pair with the other side or my device.
      - No music plays after connecting with my device.
      - Cannot pair or reconnect with my device.
      Put the earbuds into the charging case and close for 10 seconds, then open the charging case to try pairing again.

      If that doesn't work, try the following:

      1) Forget the Bluetooth pairing record on your device if you have previously connected the earbuds.

      2) Place the earbuds in the charging case and leave the cover open.

      3) Press the reset button for 3s, the light inside the case will flash once per second, then re-pair with the device. After paring successfully, the light inside the case will stay on for 1s, then breathe in and out over 4 seconds.

      If you want to connect to a new device, you need to long press and hold the reset button for 10s until you see the light effects inside the case.

      4) Turn off your device's Bluetooth and turn it on again to pair with "soundcore Liberty 4".
    • What should I do if Liberty 4 disconnects or the sound is choppy?
      Some environments (such as airports, offices, subways, crowded public spaces, etc.) can interfere with your Bluetooth connection. To optimize your Bluetooth connection:

      1. Download videos and songs instead of streaming, as it may be related to the network environment.

      2. If you have an Android phone, temporarily disable unnecessary app traffic settings on your phone.

      Or you can try:

      - Resetting the earbuds. See "How do I reset Liberty 4?"

      - Try a different device if possible.
    • How do I enable dual connections on Liberty 4?
      The earbuds can connect with two devices at the same time so you can switch between them effortlessly. To pair with another device, go to Settings > Dual Connections > Connect New Device.
    • Does the case support wireless charging?
      Yes, place the case on the wireless charging pad and make sure it's closed and centrally aligned.
    • What is Liberty 4's playtime from a single charge?
      Normal Mode: Up to 9 hours on a single charge/28 hours with the charging case.

      Noise Cancelling Mode: Up to 7 hours on a single charge/24 hours with charging case.

      Transparency Mode: Up to 7 hours on a single charge/24 hours with charging case.

      Call: Up to 5 hours on a single charge/15 hours with charging case.
    • What should I do if any of the following problems occur?
      - The earbuds don’t recharge in the charging case.
      - The earbuds keep connecting to the device even after being put back in the charging case with the cover closed.
      - The earbuds don't turn on when taken out of the charging case.
      1. Confirm the charging case has power left.

      2. Clean the charging pins with a dry cloth and rubbing alcohol to ensure all charging pins on the earbuds and charging case are completely clean and dry of sweat and water. Then put the earbuds into the case.

      3. Make sure the earbuds are in place. The LED light will breathe in and out to indicate that the earbuds are charging.
    • How long does it take to fully charge the earbuds?
      1 hour.
    • How long does it take to fully charge the charging case?
      2 hours.
    • What audio codecs do Liberty 4 support?
      SBC, AAC, and LDAC.
    • What should I do if Liberty 4's noise cancellation performance does not meet my expectations?
      Here are some tips for enhancing the sound quality and noise cancellation:

      1) Try other sizes of ear tips to ensure you're using one that fits well and creates a tight seal.

      2) Make sure you're wearing the earbuds in the correct position so that they create a tight seal. To check if you're wearing the earbuds in the perfect position, take the Fit Test on the soundcore app.

      3) Take the HearID ANC test to personalize the noise cancelling effect.

      4) Try different ANC modes to see which one suits your environment best.

      Note: In a noisy environment and at high volume, you may feel that the noise cancellation performance is not as strong.
    • How do I enable LDAC?
      1. Download and update your soundcore app to latest version.

      2. Change the sound mode to "Preferred Audio Quality" and follow the instructions to update to the latest firmware version. The LDAC codec is now enabled and will work with your LDAC compatible device. Note: The LDAC codec processing will increase the power consumption and decrease the overall playtime. Only devices with Android 8.0 or later support LDAC.

      LDAC is restricted by Bluetooth bandwidth and is not supported when using multipoint connection.
    • What should I do if the left and right earbuds are in different modes? For example one is in Normal mode and the other is in ANC or Transparency mode.
      1. Put the earbuds back into the charging case at the same time, then close the charging case for at least 3 seconds and wear them again.

      2. Reset the earbuds, see "How do I reset Liberty 4?
    • How do I enable Spatial Audio?
      1. Wear the earbuds.

      2. Enter the soundcore app and connect Liberty 4.

      3. Select Spatial Audio.

      4. Spatial Audio cannot be turned on while sound effects are turned on.

      5. Select Movie or Music mode to adjust the sense of distance while listening to different types of audio content.
    • How do I use soundcore Wellness?
      1. Select soundcore Wellness in the soundcore app.

      2. The information settings will pop up automatically when you enter soundcore Wellness for the first time. In order to get the most out of soundcore Wellness, add your personal information.

      Note: Your information is for your personal use only.

      3. Select the person icon on the top right of the screen to set or change information if needed.
    • Why is my heart rate is always calibrating?
      1. Once you remove Liberty 4 from the charging case, automatic calibration is needed in order to ensure the accuracy of the heart rate sensor.

      2. You can toggle manual calibration in the app if you prefer.
    • What should I do if there is no test data when I wear a single earbud only?
      The heart rate sensor is built into the right earbud, so it only works when you wear the right earbud.
    • Is the sensor harmful to my body?
      The heart rate sensor detects the flow of blood in the subcutaneous blood vessels through an optical sensor, and it does so without causing damage to your body.
    • What does the red light on the right earbud mean?
      When measuring blood oxygen, the right ear headset will light up red.
    • Can I measure heart rate and stress without using the soundcore app?
      You need to wear your Liberty 4 and keep the soundcore app open to measure your heart rate and stress changes while using the earbuds.
    • Why is my stress level constantly being detected?
      After activating the app, when you wear Liberty 4 and the App is running, your stress will be automatically detected, so you can check it at any time.

      In the stress detection part of the app, you can turn off the real-time stress detection if you want.
    • Why is my heart rate being monitored constantly?
      After activating soundcore Wellness, your heart rate will be automatically detected when you wear Liberty 4 and the app is running, so you can check it at any time.


      You can choose to turn off real-time heart rate detection via the heart rate display. This will stop continuous monitoring of your heart rate.
    • Why is the heart rate test value from Liberty 4 different from the value on my other heart rate monitoring devices?
      soundcore Liberty 4 earbuds and the associated soundcore app are not intended for medical purposes, including self-diagnosis and medical consultation, and is suitable for general fitness and wellness use only.
    • Declaration of Conformity

      A3953_EU DOC Form

      2022-10-27

  • How to wear Liberty 4 and change eartips?
  • How to use squeeze control on Liberty 4?
  • How to use Spatial Audio with Liberty 4?
  • How to use Liberty 4 Wellness features?
  • How to re-pair and reset Liberty 4?
  • How do I wear Liberty 4 correctly?
    -Liberty 4 comes with 4 sizes of ear wings and ear tips in S, M, M2, L. M2 is longer than the standard M size and fits deeper in your ear canal. Choose a size that fits your ears best.
    - Ensure you are wearing the left and right earbuds on the correct side.
    - If you're still not sure about the fit, take the Fit Test in the soundcore app.
  • Can I use other third-party ear tips with Liberty 4?
    No. Due to the heart rate tracking related function, the ear tips need to be transparent. Changing to third-party ear tips will affect the heart rate function. If necessary, please contact our customer support team for replacement ear tips.
  • How do I use squeeze control?
    1. Ensure you are wearing the earbuds correctly and they have detected that you are wearing them.
    2. Pinch the lower end of the earphone handle (at the groove) with two fingers. You'll hear a "click" sound to signify that the operation was successful.
    3.You can customize the controls and the squeeze force in the soundcore app.
  • How do I turn the earbuds on and off?
    Turn On:
    Slide up to open the charging case to automatically turn on Liberty 4.
    Turn Off:
    - Put the earbuds back into the charging case. The earbuds will disconnect after 10 seconds.
    - The earbuds will also turn off automatically when the earbuds are outside the case, not being worn, and have been disconnected from your device for 30 minutes. (The auto power off time can be customized in the soundcore app.)
    - When you are wearing the earbuds, they will only turn off when the battery runs out.
  • How can I adjust Liberty 4's volume via the earbuds?
    You can customize the controls according to your preferences via the app.
    1. Go to the App Store or Google Play to download the soundcore app.
    2. Pair your device with Liberty 4.
    3. Open the soundcore app to connect with Liberty 4.
    4. Select "Controls."
    5. Customize the controls according to your preferences.
    Note: Customized controls are not available when using a single earbud.
  • How do I switch to the next track/previous track?
    By default, triple-press the right earbud to go to the next track, and triple-press the left earbud to go to the previous track.
    You can customize the controls according to your preferences via the app.
    1. Go to the App Store or Google Play to download the soundcore app.
    2. Pair your device with Liberty 4.
    3. Open the soundcore app to connect with Liberty 4.
    4. Select "Controls."
    5. Customize the controls according to your preferences.
  • How do I play/pause audio?
    By default, press either earphone to play/pause audio.
    You can customize the controls according to your preferences via the app.
    1. Go to the App Store or Google Play to download the soundcore app.
    2. Pair your device with Liberty 4.
    3. Open the soundcore app to connect with Liberty 4.
    4. Select "Controls."
    5. Customize the controls according to your preferences.
    Note: The music will automatically pause if you remove the earbuds. To start playing again, wear the earbuds.
  • Can I use the left or right earbud on its own?
    Yes, remove one earbud from the charging case to use. If you are using two earbuds, you can put the earbud you don't want to use into the charging case and continue using the other one on its own.
    Note: If you are wearing two earbuds and listening in ANC mode, it will automatically switch to Normal mode when you return one earbud to the charging case. You can customize the settings in the app if you want to use ANC mode when using one earbud.
    If you wear the second earbud again, Normal mode will automatically switch back to ANC mode.
  • How do I trigger my phone's voice assistant via Liberty 4?
    Go to Settings > Controls in the soundcore app and choose a custom command for voice assistants.
  • How do I switch between ANC and Transparency modes?
    Double-press the pressure-sensitive button on the left or right earbud until you hear a "click" sound. You can add Normal mode as a custom command via the app.
  • How do I reset my Liberty 4?
    Place the earbuds in the charging case and leave the case open, then press and hold the button on the case for 10 seconds until the LED indicators flash white rapidly three times.
  • What should I do if any of the following problems occur?
    - Only one earbud has sound.
    - One side does not pair with the other side or my device.
    - No music plays after connecting with my device.
    - Cannot pair or reconnect with my device.
    Put the earbuds into the charging case and close for 10 seconds, then open the charging case to try pairing again.
    If that doesn't work, try the following:
    1) Forget the Bluetooth pairing record on your device if you have previously connected the earbuds.
    2) Place the earbuds in the charging case and leave the cover open.
    3) Press the reset button for 3s, the light inside the case will flash once per second, then re-pair with the device. After paring successfully, the light inside the case will stay on for 1s, then breathe in and out over 4 seconds.
    If you want to connect to a new device, you need to long press and hold the reset button for 10s until you see the light effects inside the case.
    4) Turn off your device's Bluetooth and turn it on again to pair with "soundcore Liberty 4".
  • What should I do if Liberty 4 disconnects or the sound is choppy?
    Some environments (such as airports, offices, subways, crowded public spaces, etc.) can interfere with your Bluetooth connection. To optimize your Bluetooth connection:
    1. Download videos and songs instead of streaming, as it may be related to the network environment.
    2. If you have an Android phone, temporarily disable unnecessary app traffic settings on your phone.
    Or you can try:
    - Resetting the earbuds. See "How do I reset Liberty 4?"
    - Try a different device if possible.
  • How do I enable dual connections on Liberty 4?
    The earbuds can connect with two devices at the same time so you can switch between them effortlessly. To pair with another device, go to Settings > Dual Connections > Connect New Device.
  • Does the case support wireless charging?
    Yes, place the case on the wireless charging pad and make sure it's closed and centrally aligned.
  • What is Liberty 4's playtime from a single charge?
    Normal Mode: Up to 9 hours on a single charge/28 hours with the charging case.
    Noise Cancelling Mode: Up to 7 hours on a single charge/24 hours with charging case.
    Transparency Mode: Up to 7 hours on a single charge/24 hours with charging case.
    Call: Up to 5 hours on a single charge/15 hours with charging case.
  • What should I do if any of the following problems occur?
    - The earbuds don’t recharge in the charging case.
    - The earbuds keep connecting to the device even after being put back in the charging case with the cover closed.
    - The earbuds don't turn on when taken out of the charging case.
    1. Confirm the charging case has power left.
    2. Clean the charging pins with a dry cloth and rubbing alcohol to ensure all charging pins on the earbuds and charging case are completely clean and dry of sweat and water. Then put the earbuds into the case.
    3. Make sure the earbuds are in place. The LED light will breathe in and out to indicate that the earbuds are charging.
  • How long does it take to fully charge the earbuds?
    1 hour.
  • How long does it take to fully charge the charging case?
    2 hours.
  • What audio codecs do Liberty 4 support?
    SBC, AAC, and LDAC.
  • What should I do if Liberty 4's noise cancellation performance does not meet my expectations?
    Here are some tips for enhancing the sound quality and noise cancellation:
    1) Try other sizes of ear tips to ensure you're using one that fits well and creates a tight seal.
    2) Make sure you're wearing the earbuds in the correct position so that they create a tight seal. To check if you're wearing the earbuds in the perfect position, take the Fit Test on the soundcore app.
    3) Take the HearID ANC test to personalize the noise cancelling effect.
    4) Try different ANC modes to see which one suits your environment best.
    Note: In a noisy environment and at high volume, you may feel that the noise cancellation performance is not as strong.
  • How do I enable LDAC?
    1. Download and update your soundcore app to latest version.
    2. Change the sound mode to "Preferred Audio Quality" and follow the instructions to update to the latest firmware version. The LDAC codec is now enabled and will work with your LDAC compatible device. Note: The LDAC codec processing will increase the power consumption and decrease the overall playtime. Only devices with Android 8.0 or later support LDAC.
    LDAC is restricted by Bluetooth bandwidth and is not supported when using multipoint connection.
  • What should I do if the left and right earbuds are in different modes? For example one is in Normal mode and the other is in ANC or Transparency mode.
    1. Put the earbuds back into the charging case at the same time, then close the charging case for at least 3 seconds and wear them again.
    2. Reset the earbuds, see "How do I reset Liberty 4?
  • How do I enable Spatial Audio?
    1. Wear the earbuds.
    2. Enter the soundcore app and connect Liberty 4.
    3. Select Spatial Audio.
    4. Spatial Audio cannot be turned on while sound effects are turned on.
    5. Select Movie or Music mode to adjust the sense of distance while listening to different types of audio content.
  • How do I use soundcore Wellness?
    1. Select soundcore Wellness in the soundcore app.
    2. The information settings will pop up automatically when you enter soundcore Wellness for the first time. In order to get the most out of soundcore Wellness, add your personal information.
    Note: Your information is for your personal use only.
    3. Select the person icon on the top right of the screen to set or change information if needed.
  • Why is my heart rate is always calibrating?
    1. Once you remove Liberty 4 from the charging case, automatic calibration is needed in order to ensure the accuracy of the heart rate sensor.
    2. You can toggle manual calibration in the app if you prefer.
  • What should I do if there is no test data when I wear a single earbud only?
    The heart rate sensor is built into the right earbud, so it only works when you wear the right earbud.
  • Is the sensor harmful to my body?
    The heart rate sensor detects the flow of blood in the subcutaneous blood vessels through an optical sensor, and it does so without causing damage to your body.
  • What does the red light on the right earbud mean?
    When measuring blood oxygen, the right ear headset will light up red.
  • Can I measure heart rate and stress without using the soundcore app?
    You need to wear your Liberty 4 and keep the soundcore app open to measure your heart rate and stress changes while using the earbuds.
  • Why is my stress level constantly being detected?
    After activating the app, when you wear Liberty 4 and the App is running, your stress will be automatically detected, so you can check it at any time.
    In the stress detection part of the app, you can turn off the real-time stress detection if you want.
  • Why is my heart rate being monitored constantly?
    After activating soundcore Wellness, your heart rate will be automatically detected when you wear Liberty 4 and the app is running, so you can check it at any time.
    You can choose to turn off real-time heart rate detection via the heart rate display. This will stop continuous monitoring of your heart rate.
  • Why is the heart rate test value from Liberty 4 different from the value on my other heart rate monitoring devices?
    soundcore Liberty 4 earbuds and the associated soundcore app are not intended for medical purposes, including self-diagnosis and medical consultation, and is suitable for general fitness and wellness use only.
  • Declaration of Conformity

    A3953_EU DOC Form

    2022-10-27

    • How to wear Liberty 4 and change eartips?
    • How to use squeeze control on Liberty 4?
    • How to use Spatial Audio with Liberty 4?
    • How to use Liberty 4 Wellness features?
    • How to re-pair and reset Liberty 4?
    • How do I wear Liberty 4 correctly?
      -Liberty 4 comes with 4 sizes of ear wings and ear tips in S, M, M2, L. M2 is longer than the standard M size and fits deeper in your ear canal. Choose a size that fits your ears best.

      - Ensure you are wearing the left and right earbuds on the correct side.

      - If you're still not sure about the fit, take the Fit Test in the soundcore app.
    • Can I use other third-party ear tips with Liberty 4?
      No. Due to the heart rate tracking related function, the ear tips need to be transparent. Changing to third-party ear tips will affect the heart rate function. If necessary, please contact our customer support team for replacement ear tips.
    • How do I use squeeze control?
      1. Ensure you are wearing the earbuds correctly and they have detected that you are wearing them.

      2. Pinch the lower end of the earphone handle (at the groove) with two fingers. You'll hear a "click" sound to signify that the operation was successful.

      3.You can customize the controls and the squeeze force in the soundcore app.
    • How do I turn the earbuds on and off?
      Turn On:

      Slide up to open the charging case to automatically turn on Liberty 4.

      Turn Off:

      - Put the earbuds back into the charging case. The earbuds will disconnect after 10 seconds.

      - The earbuds will also turn off automatically when the earbuds are outside the case, not being worn, and have been disconnected from your device for 30 minutes. (The auto power off time can be customized in the soundcore app.)

      - When you are wearing the earbuds, they will only turn off when the battery runs out.
    • How can I adjust Liberty 4's volume via the earbuds?
      You can customize the controls according to your preferences via the app.

      1. Go to the App Store or Google Play to download the soundcore app.

      2. Pair your device with Liberty 4.

      3. Open the soundcore app to connect with Liberty 4.

      4. Select "Controls."

      5. Customize the controls according to your preferences.

      Note: Customized controls are not available when using a single earbud.
    • How do I switch to the next track/previous track?
      By default, triple-press the right earbud to go to the next track, and triple-press the left earbud to go to the previous track.

      You can customize the controls according to your preferences via the app.

      1. Go to the App Store or Google Play to download the soundcore app.

      2. Pair your device with Liberty 4.

      3. Open the soundcore app to connect with Liberty 4.

      4. Select "Controls."

      5. Customize the controls according to your preferences.
    • How do I play/pause audio?
      By default, press either earphone to play/pause audio.

      You can customize the controls according to your preferences via the app.

      1. Go to the App Store or Google Play to download the soundcore app.

      2. Pair your device with Liberty 4.

      3. Open the soundcore app to connect with Liberty 4.

      4. Select "Controls."

      5. Customize the controls according to your preferences.


      Note: The music will automatically pause if you remove the earbuds. To start playing again, wear the earbuds.
    • Can I use the left or right earbud on its own?
      Yes, remove one earbud from the charging case to use. If you are using two earbuds, you can put the earbud you don't want to use into the charging case and continue using the other one on its own.

      Note: If you are wearing two earbuds and listening in ANC mode, it will automatically switch to Normal mode when you return one earbud to the charging case. You can customize the settings in the app if you want to use ANC mode when using one earbud.

      If you wear the second earbud again, Normal mode will automatically switch back to ANC mode.
    • How do I trigger my phone's voice assistant via Liberty 4?
      Go to Settings > Controls in the soundcore app and choose a custom command for voice assistants.
    • How do I switch between ANC and Transparency modes?
      Double-press the pressure-sensitive button on the left or right earbud until you hear a "click" sound. You can add Normal mode as a custom command via the app.
    • How do I reset my Liberty 4?
      Place the earbuds in the charging case and leave the case open, then press and hold the button on the case for 10 seconds until the LED indicators flash white rapidly three times.
    • What should I do if any of the following problems occur?
      - Only one earbud has sound.
      - One side does not pair with the other side or my device.
      - No music plays after connecting with my device.
      - Cannot pair or reconnect with my device.
      Put the earbuds into the charging case and close for 10 seconds, then open the charging case to try pairing again.

      If that doesn't work, try the following:

      1) Forget the Bluetooth pairing record on your device if you have previously connected the earbuds.

      2) Place the earbuds in the charging case and leave the cover open.

      3) Press the reset button for 3s, the light inside the case will flash once per second, then re-pair with the device. After paring successfully, the light inside the case will stay on for 1s, then breathe in and out over 4 seconds.

      If you want to connect to a new device, you need to long press and hold the reset button for 10s until you see the light effects inside the case.

      4) Turn off your device's Bluetooth and turn it on again to pair with "soundcore Liberty 4".
    • What should I do if Liberty 4 disconnects or the sound is choppy?
      Some environments (such as airports, offices, subways, crowded public spaces, etc.) can interfere with your Bluetooth connection. To optimize your Bluetooth connection:

      1. Download videos and songs instead of streaming, as it may be related to the network environment.

      2. If you have an Android phone, temporarily disable unnecessary app traffic settings on your phone.

      Or you can try:

      - Resetting the earbuds. See "How do I reset Liberty 4?"

      - Try a different device if possible.
    • How do I enable dual connections on Liberty 4?
      The earbuds can connect with two devices at the same time so you can switch between them effortlessly. To pair with another device, go to Settings > Dual Connections > Connect New Device.
    • Does the case support wireless charging?
      Yes, place the case on the wireless charging pad and make sure it's closed and centrally aligned.
    • What is Liberty 4's playtime from a single charge?
      Normal Mode: Up to 9 hours on a single charge/28 hours with the charging case.

      Noise Cancelling Mode: Up to 7 hours on a single charge/24 hours with charging case.

      Transparency Mode: Up to 7 hours on a single charge/24 hours with charging case.

      Call: Up to 5 hours on a single charge/15 hours with charging case.
    • What should I do if any of the following problems occur?
      - The earbuds don’t recharge in the charging case.
      - The earbuds keep connecting to the device even after being put back in the charging case with the cover closed.
      - The earbuds don't turn on when taken out of the charging case.
      1. Confirm the charging case has power left.

      2. Clean the charging pins with a dry cloth and rubbing alcohol to ensure all charging pins on the earbuds and charging case are completely clean and dry of sweat and water. Then put the earbuds into the case.

      3. Make sure the earbuds are in place. The LED light will breathe in and out to indicate that the earbuds are charging.
    • How long does it take to fully charge the earbuds?
      1 hour.
    • How long does it take to fully charge the charging case?
      2 hours.
    • What audio codecs do Liberty 4 support?
      SBC, AAC, and LDAC.
    • What should I do if Liberty 4's noise cancellation performance does not meet my expectations?
      Here are some tips for enhancing the sound quality and noise cancellation:

      1) Try other sizes of ear tips to ensure you're using one that fits well and creates a tight seal.

      2) Make sure you're wearing the earbuds in the correct position so that they create a tight seal. To check if you're wearing the earbuds in the perfect position, take the Fit Test on the soundcore app.

      3) Take the HearID ANC test to personalize the noise cancelling effect.

      4) Try different ANC modes to see which one suits your environment best.

      Note: In a noisy environment and at high volume, you may feel that the noise cancellation performance is not as strong.
    • How do I enable LDAC?
      1. Download and update your soundcore app to latest version.

      2. Change the sound mode to "Preferred Audio Quality" and follow the instructions to update to the latest firmware version. The LDAC codec is now enabled and will work with your LDAC compatible device. Note: The LDAC codec processing will increase the power consumption and decrease the overall playtime. Only devices with Android 8.0 or later support LDAC.

      LDAC is restricted by Bluetooth bandwidth and is not supported when using multipoint connection.
    • What should I do if the left and right earbuds are in different modes? For example one is in Normal mode and the other is in ANC or Transparency mode.
      1. Put the earbuds back into the charging case at the same time, then close the charging case for at least 3 seconds and wear them again.

      2. Reset the earbuds, see "How do I reset Liberty 4?
    • How do I enable Spatial Audio?
      1. Wear the earbuds.

      2. Enter the soundcore app and connect Liberty 4.

      3. Select Spatial Audio.

      4. Spatial Audio cannot be turned on while sound effects are turned on.

      5. Select Movie or Music mode to adjust the sense of distance while listening to different types of audio content.
    • How do I use soundcore Wellness?
      1. Select soundcore Wellness in the soundcore app.

      2. The information settings will pop up automatically when you enter soundcore Wellness for the first time. In order to get the most out of soundcore Wellness, add your personal information.

      Note: Your information is for your personal use only.

      3. Select the person icon on the top right of the screen to set or change information if needed.
    • Why is my heart rate is always calibrating?
      1. Once you remove Liberty 4 from the charging case, automatic calibration is needed in order to ensure the accuracy of the heart rate sensor.

      2. You can toggle manual calibration in the app if you prefer.
    • What should I do if there is no test data when I wear a single earbud only?
      The heart rate sensor is built into the right earbud, so it only works when you wear the right earbud.
    • Is the sensor harmful to my body?
      The heart rate sensor detects the flow of blood in the subcutaneous blood vessels through an optical sensor, and it does so without causing damage to your body.
    • What does the red light on the right earbud mean?
      When measuring blood oxygen, the right ear headset will light up red.
    • Can I measure heart rate and stress without using the soundcore app?
      You need to wear your Liberty 4 and keep the soundcore app open to measure your heart rate and stress changes while using the earbuds.
    • Why is my stress level constantly being detected?
      After activating the app, when you wear Liberty 4 and the App is running, your stress will be automatically detected, so you can check it at any time.

      In the stress detection part of the app, you can turn off the real-time stress detection if you want.
    • Why is my heart rate being monitored constantly?
      After activating soundcore Wellness, your heart rate will be automatically detected when you wear Liberty 4 and the app is running, so you can check it at any time.


      You can choose to turn off real-time heart rate detection via the heart rate display. This will stop continuous monitoring of your heart rate.
    • Why is the heart rate test value from Liberty 4 different from the value on my other heart rate monitoring devices?
      soundcore Liberty 4 earbuds and the associated soundcore app are not intended for medical purposes, including self-diagnosis and medical consultation, and is suitable for general fitness and wellness use only.
    • Declaration of Conformity

      A3953_EU DOC Form

      2022-10-27

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
B
Bibi
Epoustouflant

J'ai acquis cette paire d'écouteurs après m'être séparé de mes "Cambridge Melomania touch" car ils ne tenaient pas dans mes oreilles (même après avoir testé tout les embouts disponibles). Peut être un problème lié à ma propre morphologie auriculaire ? Cela dit, j'ai très vite trouvé cette paire de "Soundcore Liberty 4" qui tient parfaitement dans mes oreilles même en bougeant brusquement la tête.
Le son est particulièrement bon, voir même excellent (encore faudrait-il les comparer avec de nombreux autres du même type). Je voulais des écouteurs non pas pour téléphoner mais plutôt pour écouter de la musique et la qualité sonore surpasse largement celle de Cambridge qui pourtant est un excellent fabriquant audio HIFI.
La réduction du bruit est dingue (peut-être même dangereuse dans certaines conditions tellement c'est redoutablement efficace). Exemple : voyage au fond d'un car donc situé au dessus du bloc moteur avec le bruit que je vous laisse imaginer et là mise en fonction de la réduction du bruit via l'appli ....... PLUS UN BRUIT , mieux que les bouchons d'oreilles en cire que tout le monde connait, HALUCINANT !!!
D'ailleurs l'appli est vraiment complète tout en restant simple d'utilisation avec en plus un calibrage de la qualité d'écoute adapté à sa propre personne. Oui exactement, à sa propre personne en fonction des différentes fréquences que vous percevez lors de différent test d'écoutes pour ensuite configurer vos écouteur avec la meilleur restitution sonore qui vous va le mieux et ça, c'est vraiment du sur mesure !!!
Au niveaux stabilité du pairage, c'est excellent (jamais eu de décrochage, ni de grésillement).
Il me reste plus qu'a croiser les doigts pour qu'ils puissent me procurer encore de longues heures d'écoute avec le même confort puisqu'ils sont également très confortable, d'ailleurs tellement confortable que lorsqu'il n'y a plus de musique on oublie qu'ils sont encore dans les oreilles.
Je n'ai pas encore réussi à vider la batterie pour vous parler de l'autonomie puisqu'elle est largement suffisante pour moi (jusqu'alors 5 heures d'affilées avec peut-être le double encore disponible ?).
Aucune raison pour moi d'aller chercher mieux ailleurs. Les "Soundcores Liberty4" me satisfont à tous points de vue.

M
Menaldo
Son genial

Qualite du son